السلام عليكم
ممكن حد يفهمني اجابة السؤال ده

Based on the topology table that is shown in the exhibit and assuming that variance is not configured for EIGRP, which route or routes should appear in the routing table?

Router#show ip eigrp topology
IP-EIGRP Topology Table for AS (100)/ID(192.168.8.21)

Codes: P- Passive, A – Active, U – update, Q – Query, R- Reply,
R – reply status, s – sia status

P 192.168.2.0/24, 1 successors, FD is 2707456
Via 192.168.8.22 (2707456/2195456), Serial0/0
Via 192.168.8.18 (3815424/281600), Serial0/2
P 192.168.8.20/30, 1 successors, FD is 2169856
Via Connected, Serial0/0
P 192.168.8.16 /30, 1 successors, FD is 3789824
Via Connected, Serial0/2
P 192.168.8.24/30, 1 successors, FD is 2681856
Via 192.168.8.22 (2681856/2169856), Serial0/0
Via 192.168.8.18 (4301824/2169856), Serial0/2


A. D 192.168.8.20 (2707456/2195456), Serial0/1
B. D 192.168.2.0/24 [90/2707456] via 192.168.8.22, 00:27:50, Serial0/0
[90/3815424] via 192.168.8.18, 00:27:50, Serial0/2
C. D 192.168.2.0/24 [90/3815424] via 192.168.8.18, 00:27:50, Serial0/2
D. D 192.168.8.24/30 [90/2681856] via 192.168.8.22, 00:27:50, Serial0/0

وجزاكم الله خير