اخي نصيحة اذا لم تكن تريد تركيب كرتين شاشة على اللوحة الأم فلا تقترب ابدا من اي لوحة SLI
واذا كنت تفكر بكسر السرعة (بما انك تريد Q6600) فاهرب من لوحات SLI
لوحات الـ SLI تسخن اكثر من اللوحات القائمة على رقاقة P35 ومشاكلها اكثر والشكاوى منها كثيرة عدا عن انها لن تدعم بعض من معالجات انتل القادمة
PCI-2.0 افضل طبعا لكنها لا تشكل ذلك الفرق الكبير عن 1.0
P35 تدعم PCI-e 1.0 اما X38 و X48 (ستنزل في بداية الـ 200فتدعمان 2.0
اذا اردت اختيار X38 وانا شخصيا افضل ان تكون هي خيارك او ان تنتظر قليلا الـ X48 فيمكنك مثلا اختيار
ASUS Maximus Formula
ASUS Extreme
ASUS P5E
انا شخصيا لا احب ASUS لكن يبدو ان هذه الموديلات اثبتت جدارتها
المهم ان تسأل عن اللوحة قبل شرائها
انا وجدت في السوق من فترة لوحة GA-X38-DQ6
وعندما بحثت عنها في الانترنت وجدت هذا
First i bought the Gigabyte GA-X38-DQ6, mainly because of price and that is was the first avalible and had a need of board. BIG mistake it turn out to be since i use 4GB RAM and 4x1 is the only acceptable setup around that can perform well on memory and Gigabyte missed to make 4sticks usable on this board, either i had very bad OC, only 3GHz on Q6600 G0 and only 1066Mhz on poor 5-8-8-24 timings and crappy 8GB/s read performance at tops and that on my good 1150MHz mem. When i had only 2 sticks in 3.5GHz was not stable all the time, some reboot was needed on startup to get in to windows.
No good BIOS is out either to this crap, tested a few of the brand new ones but no improwent at all from the old F5H or F3 ones.
When ASUS Maximus SE then was avalible i decised to test one out and that was THE right thing to do since 3,6GHz was a easy breeze and 1200MHz on mem at 5-5-5-12 and 10.1GB/s read on that low clock and 24/7 use, man i can se the diffrence of memoryperformance in windows and turned down memoryperformance in 3.6 on CPU to 8GB/s showes HOW slow that realy are and what good memory realy do for overall performace.
Now the heat on NB stops me since that crap out and fails Stabilitytests when hiting 60 degres celsius so anything over 3,6 is not stable under 100% load and the time of 8-12h to be considered seriously stable so i have to wc the nb as well and the fusioncrap is not good enough for me since it only gain a few degres and is poor 3/8 fitting, i use only 1/2 in my upcoming loop exept the f-fittings for memory buty that does not affect the flow or preasure at all, luckily EK has a sexy,nice specialblock for this MB just out.
3.8-3.9GHz is duable (on water of NB when use 4x1GB) with my Q6600, even 4GHz on high vcore for short use on this board and sevral GOOD BOIS has come and ZERO vdroop since loadline calibration works on quads on BIOS 505.
Only "bad" thing is the heatpipe but that is a small thing since 3:th party and aspecialy TR:s thing is always better that stockcrap or zalmancrap for that matter and TIM used are the cheapset around the planet. Even GA:s heatpipe is to small to handle the big heat put out under 100% load of Quad and OC worth the name OC and stable under the standardrate 8-12h.
اذا انجليزياتك ضعيفة فالخلاصة انها لم تكن جيدة والذي شراها استبدلها بـ ASUS Maximus SE والتي كانت افضل بكثير
المشاركة الأصلية كتبت بواسطة الحاتمي
المفضلات