النتائج 1 إلى 3 من 3

الموضوع: register SIP 7911 with iptel.org

  1. #1
    عضو
    تاريخ التسجيل
    Apr 2006
    المشاركات
    590
    الدولة: Egypt
    معدل تقييم المستوى
    19

    register SIP 7911 with iptel.org

    السلام عليكم
    كنت عايز اعمل ريجستر لـ 7911 على موقع iptel
    التليفون بيفضل يعمل registering وفي الاخر مابيقدرش يربط
    التليفون شغال على الانترنت من خلال ADSL Modem

    وده ملف ٍSEP<MAC addr>.cnf.xml
    مع العلم:
    - جربت nat مرة yes بالـ publice IP بتاع الراوتر ومرة no
    - جربت voipControlPort مرة 5060 ومرة 5061
    وطبعا لما جربته على 5061 عملت securedSipPort :5062
    - جطيت الايبي بتاع 7911 في DMZ
    -عملت forward للبورتس 5060,5061 و 16399-16384
    - كل اللي فات لم احتاج له ابدا في C7912 ، مجرد نزلت SIP firmware وحطيت id,password, SIP domain وربط

    كود:
    <device>
    
      <deviceProtocol>SIP</deviceProtocol>
    
      <sshUserId>admin</sshUserId>
      <sshPassword>cisco</sshPassword>
    
      <devicePool>
            <dateTimeSetting> 
                <dateTemplate>M/D/Ya</dateTemplate> 
                <timeZone>Eastern Standard/Daylight Time</timeZone> 
                <ntps> 
                    <ntp>
                        <name>41.216.193.18</name> 
                        <ntpMode>Unicast</ntpMode> 
                    </ntp>
                </ntps>
            </dateTimeSetting> 
    
         <callManagerGroup>
            <members>
               <member priority="0">
                  <callManager>
                     <ports>
                        <ethernetPhonePort>2000</ethernetPhonePort>
                        <sipPort>5060</sipPort>
                        <securedSipPort>5061</securedSipPort>
                     </ports>
                     <processNodeName>iptel.org</processNodeName>
                  </callManager>
               </member>
            </members>
         </callManagerGroup>
      </devicePool>
    
      <commonProfile>
         <phonePassword>co</phonePassword>
         <backgroundImageAccess>true</backgroundImageAccess>
         <callLogBlfEnabled>2</callLogBlfEnabled>
      </commonProfile>
    
    <loadInformation>SIP11.8-3-1S</loadInformation>
    
      <vendorConfig>
         <disableSpeaker>false</disableSpeaker>
         <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
         <pcPort>0</pcPort>
         <settingsAccess>1</settingsAccess>
         <garp>0</garp>
         <voiceVlanAccess>0</voiceVlanAccess>
         <videoCapability>0</videoCapability>
         <autoSelectLineEnable>0</autoSelectLineEnable>
    
         <webAccess>0</webAccess>
         <spanToPCPort>1</spanToPCPort>
         <loggingDisplay>1</loggingDisplay>
         <loadServer></loadServer>
      </vendorConfig>
    
      <networkLocale>Egypt</networkLocale> 
    
        <networkLocaleInfo> 
            <name>Egypt</name> 
            <uid>64</uid> 
            <version>1.0.0.0-1</version> 
        </networkLocaleInfo> 
    
      <deviceSecurityMode>1</deviceSecurityMode>
    
      <authenticationURL>https://10.20.7.1/cisco/services/authentication.php</authenticationURL>
      <directoryURL>https://10.20.7.1/xmlservices/PhoneDirectory.php</directoryURL>
      <idleURL>https://10.20.7.1/xmlservices/index.php</idleURL>
      <informationURL></informationURL>
      
      <messagesURL></messagesURL>
      <proxyServerURL></proxyServerURL>
      <servicesURL>https://10.20.7.1/xmlservices/index.php</servicesURL>
    
      <dscpForCm2Dvce>96</dscpForCm2Dvce>
    
      <transportLayerProtocol>4</transportLayerProtocol>
    
      <capfAuthMode>0</capfAuthMode>
      <capfList>
         <capf>
            <phonePort>3804</phonePort>
         </capf>
      </capfList>
    
      <certHash></certHash>
      <encrConfig>false</encrConfig>
      
       <sipProfile>
         <sipProxies>
            <backupProxy></backupProxy>
            <backupProxyPort></backupProxyPort>
            <emergencyProxy></emergencyProxy>
            <emergencyProxyPort></emergencyProxyPort>
            <outboundProxy></outboundProxy>
            <outboundProxyPort></outboundProxyPort>
            <registerWithProxy>true</registerWithProxy>
         </sipProxies>
    
         <sipCallFeatures>
            <cnfJoinEnabled>true</cnfJoinEnabled>
            <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
            <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
            <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
            <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
            <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
            <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
            <rfc2543Hold>false</rfc2543Hold>
            <callHoldRingback>2</callHoldRingback>
            <localCfwdEnable>true</localCfwdEnable>
            <semiAttendedTransfer>true</semiAttendedTransfer>
            <anonymousCallBlock>2</anonymousCallBlock>
            <callerIdBlocking>2</callerIdBlocking>
            <dndControl>0</dndControl>
            <remoteCcEnable>true</remoteCcEnable>
         </sipCallFeatures>
    
         <sipStack>
            <sipInviteRetx>6</sipInviteRetx>
            <sipRetx>10</sipRetx>
            <timerInviteExpires>180</timerInviteExpires>
            <timerRegisterExpires>120</timerRegisterExpires>
            <timerRegisterDelta>5</timerRegisterDelta>
            <timerKeepAliveExpires>120</timerKeepAliveExpires>
            <timerSubscribeExpires>120</timerSubscribeExpires>
            <timerSubscribeDelta>5</timerSubscribeDelta>
            <timerT1>500</timerT1>
            <timerT2>4000</timerT2>
            <maxRedirects>70</maxRedirects>
            <remotePartyID>false</remotePartyID>
            <userInfo>None</userInfo>
         </sipStack>
    
         <autoAnswerTimer>1</autoAnswerTimer>
         <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
         <autoAnswerOverride>true</autoAnswerOverride>
         <transferOnhookEnabled>false</transferOnhookEnabled>
         <enableVad>false</enableVad>
         <preferredCodec>none</preferredCodec>
         <dtmfAvtPayload>101</dtmfAvtPayload>
         <dtmfDbLevel>3</dtmfDbLevel>
         <dtmfOutofBand>avt</dtmfOutofBand>
         <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
         <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
         <kpml>3</kpml>
    
         <natEnabled>no</natEnabled>
         <natAddress></natAddress>
    
         <stutterMsgWaiting>0</stutterMsgWaiting>
    
         <callStats>false</callStats>
         <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
         <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
    
    
         <startMediaPort>16384</startMediaPort>
         <stopMediaPort>16399</stopMediaPort>
    
         <voipControlPort>5060</voipControlPort>
         <dscpForAudio>184</dscpForAudio>
         <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
         <dialTemplate>dialplan.xml</dialTemplate>
    
         <phoneLabel>***My ID***</phoneLabel>
         <sipLines>
            <line button="1">
               <featureID>9</featureID>
               <featureLabel>***My ID***</featureLabel>
               <name>***My ID***</name>
              <displayName>mdclick</displayName>
               <contact>***My ID***</contact>
               
               <proxy>iptel.org</proxy>
               <port>5060</port>
               <autoAnswer>
                  <autoAnswerEnabled>2</autoAnswerEnabled>
               </autoAnswer>
               <callWaiting>3</callWaiting>
    
               <authName>***My ID***</authName>
               <authPassword>***My Password***</authPassword>
    
               <sharedLine>false</sharedLine>
               <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
               <messagesNumber>*97</messagesNumber>
               <ringSettingIdle>4</ringSettingIdle>
               <ringSettingActive>5</ringSettingActive>
    
               <forwardCallInfoDisplay>
                  <callerName>true</callerName>
                  <callerNumber>false</callerNumber>
                  <redirectedNumber>false</redirectedNumber>
                  <dialedNumber>true</dialedNumber>
               </forwardCallInfoDisplay>
            </line>
         </sipLines>
      </sipProfile>
    </device>
    التعديل الأخير تم بواسطة MaaM ; 10-02-2013 الساعة 17:46

  2. #2
    عضو
    تاريخ التسجيل
    Apr 2006
    المشاركات
    590
    الدولة: Egypt
    معدل تقييم المستوى
    19

    رد: register SIP 7911 with iptel.org

    المشكلة طلعت بسبب أن التليفون 7911 بيبعت sip request من source port عشوائي اعلى من 5060 وبالتالي لما الباكت بترجعله على نفس البورت اللي قام بارساله في الأول بيتجاهله لأنه مابيقبلش غير 5060
    فالحل في طريقتين وكلامها مر
    الاولى الغاء NAT من الـ Proxy Sip Server ، وطبعا لو معاك هايبقى سهل لكن المشكلة لو مالكش عليه صلاحيات
    الثانية: استخدام راوتر فيه خاصية ALG وديه بتفهم الباكت الخاصة بـ SIP protcols وبتقوم بتعديل ال source port ، لكن للأسف معظم الراوترات ديه وخاصة الرخيصة منها بتشوه الباكت وبتعدل حاجات مش المفروض انها تتعدل وبالتالي ممكن المستقبل مايستلمش اي مكالمة : )

    نصيحة، اللي عايز يشغل sip protcol على تليفون سيسكو وهايربط على sip server خارجي لا يملك عليه أي صلاحيات
    يستخدم 7912

  3. #3
    عضو
    تاريخ التسجيل
    May 2008
    المشاركات
    65
    الدولة: Egypt
    معدل تقييم المستوى
    0

    رد: register SIP 7911 with iptel.org

    شكرا علي عرضك المشكله وعرض حلها

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •